Réparez vos affaires Communauté Boutique

Womier K66 Mechanical Keyboard Switch Replacement

Introduction

If your Womier K66 mechanical keyboard has any faulty or problematic key switches, use this guide to replace the key switches. The faulty key switch may not register your presses or may register multiple inputs from a single key press instead.

In steps 3 and 6 of the guide, it requires you to desolder and solder in key switches to the board.

Ce dont vous avez besoin

  1. Womier K66 Mechanical Keyboard Switch Replacement, Switch: étape 1, image 1 de 3 Womier K66 Mechanical Keyboard Switch Replacement, Switch: étape 1, image 2 de 3 Womier K66 Mechanical Keyboard Switch Replacement, Switch: étape 1, image 3 de 3

    • Remove the keycaps from the keyboard using the keycap remover.

    Modifier

  2. Womier K66 Mechanical Keyboard Switch Replacement: étape 2, image 1 de 3 Womier K66 Mechanical Keyboard Switch Replacement: étape 2, image 2 de 3 Womier K66 Mechanical Keyboard Switch Replacement: étape 2, image 3 de 3

    • Flip the keyboard over so the backside is facing up.

    • Use the Phillips #0 screwdriver to remove the fourteen 1.52 mm screws.

    • Remove the back plate of the keyboard.

    Modifier

  4. Womier K66 Mechanical Keyboard Switch Replacement: étape 3, image 1 de 3 Womier K66 Mechanical Keyboard Switch Replacement: étape 3, image 2 de 3 Womier K66 Mechanical Keyboard Switch Replacement: étape 3, image 3 de 3
    Outil utilisé dans cette étape :
    Desoldering Pump
    $3.99
    J'achète

    • If you're unfamiliar with solder or need a refresher, review the How to Solder and Desolder guide.

    • Set your soldering iron to 400 °C.

    • Apply the soldering iron to the solder joints and remove the solder with the desoldering pump.

    • Be careful when soldering as the iron is very hot.

    Modifier

  5. Womier K66 Mechanical Keyboard Switch Replacement: étape 4, image 1 de 3 Womier K66 Mechanical Keyboard Switch Replacement: étape 4, image 2 de 3 Womier K66 Mechanical Keyboard Switch Replacement: étape 4, image 3 de 3

    • Remove the key switch from the board using the key switch puller.

    Modifier

  6. Womier K66 Mechanical Keyboard Switch Replacement: étape 5, image 1 de 3 Womier K66 Mechanical Keyboard Switch Replacement: étape 5, image 2 de 3 Womier K66 Mechanical Keyboard Switch Replacement: étape 5, image 3 de 3

    • Place your new switch onto the board.

    • In this case we used a Gateron Linear switch but this could be any variety of switches.

    Modifier

  7. Womier K66 Mechanical Keyboard Switch Replacement: étape 6, image 1 de 3 Womier K66 Mechanical Keyboard Switch Replacement: étape 6, image 2 de 3 Womier K66 Mechanical Keyboard Switch Replacement: étape 6, image 3 de 3

    • Apply new solder to the soldering joints of the replacement switch.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Minh-Tam Nguyen

Membre depuis le 11/03/22

133 Réputation

1 tutoriel rédigé

Badges: 2

Équipe

York University, Team B-7, Allen Fall 2022 Membre de l'équipe York University, Team B-7, Allen Fall 2022

YORK-ALLEN-F22SBG7

3 membres

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 15

Total : 436